Raytron Technical Review RESEARCH ARTICLE WP-06-00

CCAA: Enhanced Mechanical Properties

RAYTRON Technical Team¹

¹RAYTRON Group, China

发布日期: March 2026 版本: 1.0

DOI: 10.1234/raytron.2026.WP-01-20

摘要

Copper-clad aluminum alloy (CCAA) represents the evolution of CCA technology, using high-strength aluminum alloys as core material. This whitepaper examines the advantages of alloy cores, including improved tensile strength, fatigue resistance, and high-temperature performance, providing material selection guidance and processing considerations for CCAA conductors.

核心发现

Significant Tensile Strength Improvement CCAA-6201 achieves 88% higher tensile strength than standard CCA-1350, reaching 320-380 MPa for high-strength applications.
Excellent Fatigue Resistance CCAA-6101 achieves 90 MPa fatigue limit, CCAA-6201 reaches 110 MPa, significantly improved from CCA-1350's 55 MPa.
Superior High-Temperature Performance Alloy core provides better creep resistance, maintaining stability at elevated temperatures for applications like transformers.
Application-Oriented Material Selection 6101 alloy suits automotive vibration environments, 6201 alloy meets aerospace high-strength requirements, providing targeted solutions.

关键词

CCAA;copper clad aluminum alloy;high strength CCA;6101;6201;enhanced properties

1. Introduction

Standard CCA uses pure aluminum (1350) as core material, limiting mechanical properties. CCAA uses heat-treatable aluminum alloys to enhance performance.

Create alloy core performance comparison chart

MEDIA TODO

Figure Fig. 1 Alloy Core Performance Comparison

2. Aluminum Alloy Core Selection

3. Performance Enhancements

Create fatigue performance S-N curves

MEDIA TODO

Figure Fig. 2 Fatigue Performance S-N Curves

4. Manufacturing Considerations

5. Application Advantages

6. Design Guidelines

7. Conclusion

CCAA outperforms standard CCA in applications requiring high strength, fatigue resistance, and high-temperature performance.

8. References

ASM Handbook Volume 2. (2020). Aluminum Alloys.

常见问题

What is the main difference between CCAA and standard CCA?

CCAA uses heat-treatable aluminum alloys (such as 6101, 6201) as core material, while standard CCA uses pure aluminum (1350). Alloy cores provide higher strength, better fatigue resistance and creep performance, with slightly reduced conductivity.

How much does CCAA cost compared to CCA?

CCAA material costs 10-30% more than standard CCA, depending on alloy type. CCAA-5005 adds about 10-15%, CCAA-5052 adds 15-25%, CCAA-6061 adds 20-30%. However, considering longer service life and reliability, overall cost-effectiveness is better.

What applications are suitable for CCAA?

CCAA is particularly suitable for high-vibration environments (automotive engine bay wiring), high-temperature applications (transformer windings), aerospace (high-strength lightweight requirements), and industrial machinery (robot wiring). Any application requiring higher mechanical properties than standard CCA can consider CCAA.

How is CCAA's conductivity?

CCAA conductivity depends on alloy core type and copper cladding ratio. CCAA-5052 achieves about 50-55% IACS, CCAA-6061 about 52-58% IACS, slightly lower than standard CCA's 62-68% IACS, but still within acceptable range.

图表

Create alloy core performance comparison chart

Fig. 1 Alloy Core Performance Comparison

Create fatigue performance S-N curves

Fig. 2 Fatigue Performance S-N Curves

表格

Table 1 Alloy Systems

Alloy	Composition	Key Property
6101	Al-Mg-Si	Good conductivity + strength
6201	Al-Mg-Si	Higher strength
5052	Al-Mg	Good corrosion resistance

Table 2 Tensile Strength Comparison

Material	UTS (MPa)	vs CCA Improvement
CCA-1350	170-200	Baseline
CCAA-6101	250-300	+47%
CCAA-6201	320-380	+88%

Table 3 Fatigue Performance

Material	Fatigue Limit (MPa)
CCA-1350	55
CCAA-6101	90
CCAA-6201	110

Table 4 Application Guide

Application	Recommended Alloy	Reason
Automotive	CCAA-6101	Vibration fatigue
Aerospace	CCAA-6201	Strength + weight
Transformer	CCAA-6101	Temperature performance

参考文献

ASM International Aluminum Alloys Handbook ASM (2020)

权威参考链接

ASTM International IEC (International Electrotechnical Commission) ISO (International Organization for Standardization) SAE International IEEE

CCAA: Enhanced Mechanical Properties