跳转到主要内容
Raytron Technical Review RESEARCH ARTICLE WP-03-02

CCS-30%同轴电缆芯

CCS-30% IACS: Coaxial Cable Core

RAYTRON技术团队1 *

1RAYTRON集团技术研究中心, 中国

*通讯作者

收稿: 2025年12月 接受: 2026年2月 发布: 2026年3月
DOI: 10.1234/raytron.2026.WP-03-02

1. 引言

1.1 CCS-30%定位

创建同轴电缆结构示意图

MEDIA TODO
Figure Fig. 1 同轴电缆结构示意图

2. 材料规格

3. 射频性能分析

3.1 趋肤效应优势

在射频频率下,电流在铜包覆层中流动,钢芯提供强度。

创建衰减性能对比图

MEDIA TODO
Figure Fig. 2 衰减性能对比

4. CATV应用

5. 卫星应用

6. 结论

CCS-30%为同轴电缆应用提供优秀的性价比,在射频性能接近铜的同时提供更高强度。

常见问题

Why is CCS-30% used for coaxial cable center conductors?

CCS-30% provides the optimal balance between conductivity and strength for coaxial cables. At RF frequencies, skin effect causes current to flow primarily in the copper cladding, making the steel core invisible to the signal while providing mechanical strength.

How does skin effect benefit CCS in coaxial applications?

At RF frequencies (typically 5 MHz to 1 GHz for CATV), skin depth is very small (typically less than 10 micrometers). Current flows almost entirely in the copper cladding, so the steel core doesn't affect signal transmission while providing structural support.

What is the attenuation difference between CCS-30% and solid copper?

CCS-30% typically shows 3-5% higher attenuation than solid copper at CATV frequencies. For example, at 1 GHz, CCS may have 14.6 dB/100m vs 14.0 dB/100m for copper - a minimal difference that is easily compensated in system design.

What coaxial cable types use CCS-30%?

CCS-30% is commonly used in RG-6, RG-59, RG-11, and similar coaxial cables for CATV, satellite TV, and broadband applications. It's the dominant choice for drop cables and distribution cables in cable television networks.

图表

创建同轴电缆结构示意图

Fig. 1 同轴电缆结构示意图

创建衰减性能对比图

Fig. 2 衰减性能对比

表格

Table 1 CCS等级定位
等级导电率主要应用
CCS-21%20-23%接地
CCS-30%28-32%同轴电缆
CCS-40%38-42%高导电需求
Table 2 材料规格
组分规格
芯材低碳钢
包覆层铜(≥99.9%)
铜体积比28-32%
Table 3 性能参数
性能CCS-30%单位
导电率28-32% IACS
抗拉强度500-700MPa
密度~8.0g/cm³
Table 4 衰减对比(RG-6)
频率Cu (dB/100m)CCS-30% (dB/100m)
100 MHz4.04.2
500 MHz9.59.9
1 GHz14.014.6

参考文献

  1. SCTE SCTE Standards for Coaxial Cable SCTE (2020)
  2. ASTM International ASTM B452: Copper-Clad Steel Wire ASTM (2020)

马上联系锐创,让每米材料为您创造更高价值

我们的技术团队是中国多项国家标准的制定者,拥有30年行业经验和34项专利,为您提供专业的双金属复合材料解决方案。立即联系我们,获取技术支持和产品报价。

发送邮件 WhatsApp

在线联系

通常在24小时内回复

扫码添加企业微信

扫码添加企业微信

拨打电话
18605755180
获取报价 WhatsApp咨询